Spring Lock Roller Blind System

A flexible system for all normal size Roller Blinds

The system 32 spring lock side control Roller Blind System has been developed to overcome many of the problems associated with more complicated mechanisms.The principle of the anti crash device is very simple. It does not depend upon a ratchet system or a clutch but uses a spiral wound spring which locks the roller in any position as soon as the control chain is released. There are two strengths of end sets. The standard unit is for blinds with light to medium weights of fabric. On the medium unit the control end is fitted with a stronger spring to hold blinds with medium to heavier weights of fabric.

At the idle end of both units is a spring leaded plunger. This is designed to make fixing as easy as possible. In fact using this system the longest blind can be fitted into brackets by one person.

System 32 spring lock end sets have a patent locking device which prevents a blind being pulled from it's brackets through misuse, as it can be seen from the inset drawing, a hook on the control end locks into the bracket to prevent sideways movement of the blind.. This innovative Spring Lock Roller Blind System is very flexible. As you would expect control ends are not handed and the fixing brackets are universal.